Community of Sexsoundlovers

guys i have some record but the voice is far , how clean a record when the sound is very very low , what is the best combinaison for clean with wavepad for up the sound in background , with noise reduce it s worst , so i think i have to play with the frequency or i dont know , can someone help and give a method , it ll be very apreciate , thank u guys

Hi,

Well, it's not an easy problem to solve. There is no universal recipe.It depends a lot of the entire acquisition chain and the environment context of recording.
An improvement treatment can work fine for a sound file but not for another one. The only way is to try, test and try again with a not guaranted result. It's nearly an iterative process but you must know that below a certain record quality, there is a little to do.
Anyway, here you find some discussion which can help you:

viewtopic.php?f=9&t=9063
viewtopic.php?f=9&t=5409
viewtopic.php?f=9&t=5628
viewtopic.php?f=9&t=8826
viewtopic.php?f=9&t=8583
viewtopic.php?f=9&t=264
viewtopic.php?f=9&t=3968
viewtopic.php?f=9&t=3984
viewtopic.php?f=9&t=3992
viewtopic.php?f=9&t=5506
viewtopic.php?f=9&t=7127

gengiskhan wrote: ↑26 Dec 2020 03:08 guys i have some record but the voice is far , how clean a record when the sound is very very low , what is the best combinaison for clean with wavepad for up the sound in background , with noise reduce it s worst , so i think i have to play with the frequency or i dont know , can someone help and give a method , it ll be very apreciate , thank u guys

Use adobe audition
I use it

devilfather wrote: ↑29 Dec 2020 23:02

gengiskhan wrote: ↑26 Dec 2020 03:08 guys i have some record but the voice is far , how clean a record when the sound is very very low , what is the best combinaison for clean with wavepad for up the sound in background , with noise reduce it s worst , so i think i have to play with the frequency or i dont know , can someone help and give a method , it ll be very apreciate , thank u guys

Use adobe audition
I use it

I'd love if you could give me some tips! Like maybe how to boost the sounds from a recording which is pretty low and like noisy...
I tried following tutorials online, but most don't work well enough and others are just wayyy too complicated to try

Alisha Pink wrote: ↑31 Dec 2020 14:15

devilfather wrote: ↑29 Dec 2020 23:02

gengiskhan wrote: ↑26 Dec 2020 03:08 guys i have some record but the voice is far , how clean a record when the sound is very very low , what is the best combinaison for clean with wavepad for up the sound in background , with noise reduce it s worst , so i think i have to play with the frequency or i dont know , can someone help and give a method , it ll be very apreciate , thank u guys

Use adobe audition
I use it

I'd love if you could give me some tips! Like maybe how to boost the sounds from a recording which is pretty low and like noisy...
I tried following tutorials online, but most don't work well enough and others are just wayyy too complicated to try

There are a few tips by experts in this FAQ area, mostly pinned to the top of the Know-How and the Software subforum. My favorite in practicing is this one by emmpet8 for it´s simplicity in applying:

viewtopic.php?f=10&t=7856

Thank you!! I don't know how I missed that one haha... I was looking at most of the threads there to find some saving grace
You're right, it does seem simple and effective... fingers crossed!!

If nothing else, we just might have to go the nuclear route hahaha
But it kinda scares me of getting caught, ngl...

So the new house has carpeting in the hallway and hard wood floors in the rooms... (i'm sure you know where this is going haha)
...which causes there to be a gap under the door, I bet sliding my iPhone alittle bit inside would record everything crystal clear.

Am I crazy to actually be considering this?